process measurement control display instrumentation products image
 

Products » Catalogue index » LED digital displays

 
 

Process indicators / displays / panel meters (LED)

 

Programmable 5 digit process display with alarms
6 digit non-volatile counter
3½ digit process display
4½ 25mm digit digital indicator
Large digit display

Also see
Universal Input Programmable panel meters

 
spacer gif

 
   

5 digit Process Display
programmable with alarms

New
Version !
Now with full
5-digit display and user linearisation

The 500-TT provides a scaleable display of an analogue signal in engineering units. User configurable scaling to ranges within - 9999 to +99999, input signal selection and universal mains power enable spares/stock holding to be kept to a minimum. Three alarm relays provide voltage free contacts that change state when the input signal passes an adjustable reference set-point. 10-point user programmable linearisation. Simple to use yet powerful menu-driven software enables fast flexible set-up from the front panel. More information here...

programmable process display with alarms
 

500-TT/0

 
 

with Parallel BCD output

500-TT/1

 
 

Splash-resistant front panel cover (up to IP65)

500-COV

 
 

Programmable process display data sheet Programmable process display data sheet

 
 

Programmable process display user guide Programmable process display user guide

 
top of 107 series instrumentation
 

6 Digit Counter With Battery
Backup

This unit is an electronic counter which provides non-volatile storage of the accumulated count when powered down.
Inputs may be contact closure, change-over contacts, voltage level change, open collector or proximity switch. Overflow output and reset input are provided. User selectable options include enabling continued counting in power down mode. Display Red 0.56" high digits.

503-6 non-volatile counter

96mm wide
48 mm high
162mm deep

 

503-6B

 

6 - digit counter information sheet 6 digit counter data sheet


 

Process
Display

Field Programmable, this unit provides a high accuracy 3½ digit read out of an analogue signal in engineering units. The DPM will accept raised and true zero voltage or current signals. Custom made legends are available at no extra cost and are easily changed by the user. Display - red, 0.56" high digits.

Field programmable process display

96mm wide
48 mm high
162mm deep

 

3½ digit display - 14.2mm high digits

510

 

Splash-resistant front panel cover (up to IP65)

500-COV

 

Process display data sheet Process display data sheet

 

Process display user guideProcess display user guide

 
top of 107 series instrumentation
 

Digital
Indicator

 

Improved
Version !
Now with peak-reading

The 550-2A provides a scaleable 4½ digit display of an analogue signal in engineering units. With high brightness 25mm LED displays, this instrument offers solutions for applications where long-range readability is important. User configurable scaling to ranges within +19999 to -19999, input signal selection and universal mains power enable spares/stock holding to be kept to a minimum.

High brightness 25mm display • User configurable scaling to ranges within +19999 to -19999 • Accepts most standard process signals • Universal AC power supply (85 to 260 Vac 50-60Hz) • Unplugable connectors • Custom made legends • Optional splash resistant front panel
Further information on digital indicator here»

panel meter with large digits

144 mm wide
72 mm high
144 mm deep

 

Digital Indicator

550-2B

 

Splash-resistant front panel cover (up to IP65)

550-COV

 
 

Digital Indicator information Digital indicator data sheet

 
 

Digital Indicator user guideDigital indicator user guide

 
   
top of 107 series instrumentation